Loading...
 

SW4STM32 and SW4Linux fully supports the STM32MP1 asymmetric multicore Cortex/A7+M4 MPUs

   With System Workbench for Linux, Embedded Linux on the STM32MP1 family of MPUs from ST was never as simple to build and maintain, even for newcomers in the Linux world. And, if you install System Workbench for Linux in System Workbench for STM32 you can seamlessly develop and debug asymmetric applications running partly on Linux, partly on the Cortex-M4.
You can get more information from the ac6-tools website and download (registration required) various documents highlighting:

System Workbench for STM32

Forum List Topic List

You are viewing a reply to Changing flash program start address in order to implement EEPROM emulation on STM32F722VET  

Changing flash program start address in order to implement EEPROM emulation on STM32F722VET

Posted by dautrevaux on 2018-06-15 11:26 France

Hi again,

To be a bit more precise, reservibg the first 16kB (first sector) and placing there only the vector table can be done by replacing th eline that says 
. = ALIGN(4);
at the end of the .isr_vector section by 
. = ALIGN(0x4000);
. Then add a 32kB section for your EEPROM emulation before the .text section or align to 64kB and use the last two 16kB sectors for your EEPROM emulation...


Bernard (Ac6)

Reads: 1518
Link