Forum: System Workbench for STM32

How To Get Assembler Output in a File

Posted by namcho on 2016-08-25 08:04

Hello,

I have failed to get assembler output.

Here are some links which I tryed:
- http://www.systutorials.com/240/generate-a-mixed-source-and-assembly-listing-using-gcc/
- http://stackoverflow.com/questions/137038/how-do-you-get-assembler-output-from-c-c-source-in-gcc
- http://www.delorie.com/djgpp/v2faq/faq8_20.html
- http://christiangarbin.blogspot.com.tr/2013/05/c-generating-assembly-code-with-gccg.html

I have wrote these codes into C/C++ Build -> Settings -> MCU GCC Compiler -> Command segment.

So any workaround about it?

Update: Answer was written in that link: http://www.openstm32.org/forumthread2152

Reads: 17564

Link

Posted by tarek bouchkati on 2016-08-30 13:40 Tunisia

Does this solution worked for you ? (http://www.openstm32.org/forumthread2152)

Link

Posted by namcho on 2016-08-30 20:40

Yes it has worked for me.

You should simply follow that:
C/C++ Build -> Settings -> Build Steps -> Post-build steps.
Than copy and paste the whole thing below

arm-none-eabi-objdump -D “${BuildArtifactFileBaseName}.elf” > “${BuildArtifactFileBaseName}.lst && arm-none-eabi-objcopy -O ihex “${BuildArtifactFileBaseName}.elf” “${BuildArtifactFileBaseName}.hex”; arm-none-eabi-size “${BuildArtifactFileName}”

After compiletion ProjeName.lst file should be generated under Debug or Release folder depends on your selection.

Link