SW4STM32 and SW4Linux fully supports the STM32MP1 asymmetric multicore Cortex/A7+M4 MPUs

   With System Workbench for Linux, Embedded Linux on the STM32MP1 family of MPUs from ST was never as simple to build and maintain, even for newcomers in the Linux world. And, if you install System Workbench for Linux in System Workbench for STM32 you can seamlessly develop and debug asymmetric applications running partly on Linux, partly on the Cortex-M4.
You can get more information from the ac6-tools website and download (registration required) various documents highlighting:

System Workbench for STM32

How To Get Assembler Output in a File


I have failed to get assembler output.

Here are some links which I tryed:
- http://www.systutorials.com/240/generate-a-mixed-source-and-assembly-listing-using-gcc/Question
- http://stackoverflow.com/questions/137038/how-do-you-get-assembler-output-from-c-c-source-in-gccQuestion
- http://www.delorie.com/djgpp/v2faq/faq8_20.htmlQuestion
- http://christiangarbin.blogspot.com.tr/2013/05/c-generating-assembly-code-with-gccg.htmlQuestion

I have wrote these codes into C/C++ Build -> Settings -> MCU GCC Compiler -> Command segment.

So any workaround about it?

Update: Answer was written in that link: http://www.openstm32.org/forumthread2152Question

Does this solution worked for you ? (http://www.openstm32.org/forumthread2152)

Yes it has worked for me.

You should simply follow that:
C/C++ Build -> Settings -> Build Steps -> Post-build steps.
Than copy and paste the whole thing below

arm-none-eabi-objdump -D “${BuildArtifactFileBaseName}.elf” > “${BuildArtifactFileBaseName}.lst && arm-none-eabi-objcopy -O ihex “${BuildArtifactFileBaseName}.elf” “${BuildArtifactFileBaseName}.hex”; arm-none-eabi-size “${BuildArtifactFileName}”

After compiletion ProjeName.lst file should be generated under Debug or Release folder depends on your selection.