Loading...
 

Zephyr project on STM32

   Zephyr Workbench, a VSCode extension to manage Zephyr on STM32.
It enables users to easily create, develop, and debug Zephyr applications.
Main features:
  • Install host dependencies.
  • Import toolchain and SDK.
  • Create, configure, build and manage apps.
  • Debug STM32.
You can directly download it from the VSCode marketplace
For more details, visit the Zephyr Workbench

System Workbench for STM32

Forum List Topic List

[ prev topic ]  

Sending characters to a terminal emulator from the STM32469I-Discovery board?

Posted by jimRsemi on 2018-07-30 02:37

Code below compiles and runs but nothing appears in an a PuTTY (or similar terminal emulator) window?

HAL_Init();

s_UARTHandle.Instance = USART3;
s_UARTHandle.Init.BaudRate = 115200;
s_UARTHandle.Init.WordLength = UART_WORDLENGTH_8B;
s_UARTHandle.Init.StopBits = UART_STOPBITS_1;
s_UARTHandle.Init.Parity = UART_PARITY_NONE;
s_UARTHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
s_UARTHandle.Init.Mode = UART_MODE_TX_RX;

if (HAL_UART_Init(&s_UARTHandle) != HAL_OK) {
//asm(“bkpt 255”);
}

sprintf((char *)buffer,”Test”);

while(1) {
HAL_Delay(1000);
HAL_UART_Transmit(&s_UARTHandle, buffer, sizeof(buffer), HAL_MAX_DELAY);
}

Reads: 5781
Link
Posted by Zaphod on 2018-07-30 16:49

Need more info. What have you done to try and debug this? What does your code in HAL_UART_MspInit() look like? Does it map the USART signals to the correct pins for the DISCO board (which pins are those)? On the PC, I presume you have the ST virtual COM port driver installed and you are connecting PuTTY to the correct COM port? How do you know that is the correct port?

What have you seen when you used the debugger to trace into the HAL_UART_Transmit() call? Does it appear to actually write the buffer contents to the USART TX register?

And probably not related to this, but something to look at anyway - you don’t show the declaration for “buffer” so we don’t know how big it is. You are storing 5 bytes in it (‘T’, ‘e’, ‘s’, ‘t’ plus trailing NULL), but then telling HAL_UART_Transmit() to send the entire buffer. At the very least in this case use strlen(buffer) instead of sizeof().

Link