Posted by mrred128 on 2017-06-26 19:51

I get this error wiile attempting to run any code (sucessful build)

=============
Open On-Chip Debugger 0.10.0-dev-00278-ga53935e-dirty (2017-05-09-09:25)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
srst_only separate srst_nogate srst_open_drain connect_assert_srst
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
padded zone erase set to 1
adapter speed: 4000 kHz
adapter_nsrst_delay: 100
Info : clock speed 4000 kHz
Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
Info : STLINK v2 JTAG v28 API v2 M v18 VID 0x0483 PID 0x374B
Info : using stlink api v2
Info : Target voltage: 3.226333
Info : STM32L475VGTx.cpu: hardware has 6 breakpoints, 4 watchpoints
Error: timed out while waiting for target halted
TARGET: STM32L475VGTx.cpu - Not halted
in procedure ‘program’
in procedure ‘reset’ called at file “embedded:startup.tcl”, line 478
in procedure ‘ocd_bouncer’

• Unable to reset target **

shutdown command invoked

==============