SW4STM32 and SW4Linux fully supports the STM32MP1 asymmetric multicore Cortex/A7+M4 MPUs

   With System Workbench for Linux, Embedded Linux on the STM32MP1 family of MPUs from ST was never as simple to build and maintain, even for newcomers in the Linux world. And, if you install System Workbench for Linux in System Workbench for STM32 you can seamlessly develop and debug asymmetric applications running partly on Linux, partly on the Cortex-M4.
You can get more information from the ac6-tools website and download (registration required) various documents highlighting:

System Workbench for STM32

how to tell gcc to generate a hex file?

so in AC6 ver. i go to the tool settings and there’s no option to choose the output format. anyone know the command line option to tell gcc to generate a hex file?

thanx, mike

using a nucleo 70RB board with win7

By default SW4STM32 generates an ELF file and a BIN file.
For test, I updated the original GCC command available in :
Properties >> Settings >> Build Steps >> Post-build steps
...with (to get an ELF, a BIN and an HEX files) :
arm-none-eabi-objcopy -O binary “${BuildArtifactFileBaseName}.elf” “${BuildArtifactFileBaseName}.bin” && arm-none-eabi-objcopy -O ihex “${BuildArtifactFileBaseName}.elf” “${BuildArtifactFileBaseName}.hex” && arm-none-eabi-size “${BuildArtifactFileName}”

You can find the same question in previous posts :

yes thanx for the reply i did end up finding the other thread and i got the output i needed.

mike :-)