Loading...
 
Skip to main content

System Workbench for STM32

Forum List Topic List

Forums » System Workbench for STM32 » LwIP .bin application for the stm32f746 discovery board is too large
 
Thread actions
Print this page
  • Print all pages

    • LwIP .bin application for the stm32f746 discovery board is too large

    Posted by qstrydom on 2017-02-03 16:32

    I have compiled the LwIP example using the stm32 eclipse workbench with debug info set to none, assert disabled, ---- spec = nano.specs as a linker option and the compiled binary is roughly 393 MB. Can someone please help?

    Thanks

    Reads: 9233
    Posted by Brian.Shankland on 2017-08-29 12:19

    Hello,
    Found same problem but eventually tracked it down.
    Not sure if this is the correct fix but it works.

    If you look into the linker script file for the project "STM32F746NGHx_FLASH.ld" you will see four memory locations mapped to the SRAM device.
    At the bottom of the file these are used for the ethernet buffers (recently moved in latest release of librray), but they are missing the NOLOAD attribute so the linker is placing them into the BIN file and has to include all memory from the start ofFLASH at 0x08000000 to 0x20000000.

    What the end section should look like is as follows:

    .RxDecripSection (NOLOAD) : { *(.RxDescripSection) } >Memory_B1
    .TxDescripSection (NOLOAD) : { *(.TxDescripSection) } >Memory_B2
    .RxarraySection (NOLOAD) : { *(.RxBUF) } >Memory_B3
    .TxarraySection (NOLOAD) : { *(.TxBUF) } >Memory_B4


    This creates a nice 107KB BIN file.


     
    Collapse/expand modules below