Loading...
 
Skip to main content

System Workbench for STM32

Forum List Topic List

Forums » System Workbench for STM32 » Can't create Ac6 Debug Configuration to CubeMX project
 
Thread actions
Print this page
  • Print all pages

    • Can't create Ac6 Debug Configuration to CubeMX project

    Posted by shuji_mikami on 2016-11-15 10:14

    Hi, I use CubeMX and SW4STM32 to develop STM32F407VE MCU.
    I have a problem in debug.

    Previously, I created a CubeMX project for STM32F4Discovery, using board-selector.
    Then, generated code for SW4STM32, import, build, debug was successful.

    After that, I created a project for STM32F407VE, using mcu-selector.
    Generating code, import and build were successfull.

    When I tried to create debug configuration, from "Run" menu, there was no reaction.
    Then tried from Project Propaties>>Run/Debug Settings>>New>>Ac6 STM32 Debugging, no reaction, although, C/C++ Application, successfull.

    How can I add Debug Configuration?

    Reads: 14654
    Posted by tang on 2016-11-15 11:14

    Hi,

    To launch debug, can you try :
    Right click on the project, then choose Debug As > Ac6 STM32 C/C++ Application. It should automatically create the debug configuration and launch de debug.

    To create debug configuration only :
    Right click on the project, then choose Debug As > Debug configurations... then select Ac6 STM32 Debugging > New

    Hope it solves your problem,
    Kevin


         Posted by Vetch on 2016-11-15 12:54

    Hi,
    The solution proposed by Kevin is working for me.
    There is no ST Board for the F407VE, but I can launch the debug on a custom board with the following steps :
    - I choose Debug As > Debug configurations >> Ac6 STM32 C/C++ Application;
    - I update the "Debug Device" and "Debug interface" fields depending on the custom board features (see snapshot);
    ... then it works

    Custom_Board.png (31.81 Kb)

    Posted by shuji_mikami on 2016-11-16 06:01

    Thank you for your reply, Kevin, Vetch

    I tried your suggestion, but It didn't work.

    When I make a Project from SW4STM32, your suggestion works.
    But, Importing from CubeMX, it doesn't work.

    I could open Debug Configuration Dialog, and I double-clicked Ac6 STM32 Debugging,
    An error has occured(see snapshot).

    Does snapshot be any hint?

    error.png (198.54 Kb)
    Posted by tang on 2016-11-16 10:51

    Hi,

    Do you use the latest version of System Workbench ? Please verify it by selecting : Help > Check for updates...

    Then delete every debug configuration previously created and associated to your project : Project properties > Run/Debug Settings, select all, then delete them.

    Finally, try to recreate the Debug Configuration :
    Right click on the project, then choose Debug As > Ac6 STM32 C/C++ Application. It should automatically create the debug configuration and launch de debug.
    System Workbench should ask you to create a custom board as Vetch said.

    Hope it works,
    Kevin.

         Posted by shuji_mikami on 2016-11-17 03:25

    Thanks Kevin,

    I checked version of Workbench and Updated, but it didn't affect.

    When I try ur suggestion, "Right click on the project, then choose Debug As > Ac6 STM32 C/C++ Application"
    a messagebox is displayed a moment(too quickly closed to recognize what is wrriten). But debug dialog doesn't appear.

    Finally, I found a desperate solution.

    1. Right click on the other project which can be debugged
    2. choose Debug As > Debug Configuration(Debug Configulation Dialog open)
    3. Create New Ac6 Configulation
    4. Input the elf file path of the project in problem, to C/C++ Application: TextBox
    5. Select the project in problem to Project: TextBox

    After Do that,
    I can debug the project as usual.


         Posted by Vetch on 2016-11-16 09:06

    Dear Shuji_Mikami,
    I faced the same error, but Kevin proposed to right-click on your project and select "Debug As" in the roll-down menu (as shown in the attached snapshot)
    Sorry for asking you to check it again : please, may you confirm that there is no "Ac6 STM32 C/C++ Application" option for you after "Debug As"?

    Debug_As.png (132.40 Kb)
    Posted by shuji_mikami on 2016-11-17 03:30

    Thanks, Vetch,

    As I reply to Kevin,
    Right click on the project and select Debug As Ac6 doesn't work.

    I found a desperate solution(wrote in reply message to Kevin).
    I hope it will be some hint of my fault.