Loading...
 
Skip to main content

System Workbench for STM32

Forum List Topic List

Forums » System Workbench for STM32 » Can't run the project
 
Thread actions
Print this page
  • Print all pages

    • Can't run the project

    Posted by Slavius on 2016-10-04 14:22

    Firstly, everything was allright. Then I cleaned my computer and deleted vany unuseful (as i thought) files. After this began problems.
    I create project in StmCube, import to the SW4STM32.

    After building I have this error:
    No rule to make target `E:/Slava/myworkspace/myproject/Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc/startup_stm32f407xx.s', needed by `Application/SW4STM32/startup_stm32f407xx.o'. Stop. myproject C/C++ Problem

    When i try to create debug configuration (Ac6) I have message "An error has occurred. See error log for more details.Argument cannot be null".
    In log there is message "Problems occurred when invoking code from plug-in: "org.eclipse.jface"."

    Exception trace stack:
    java.lang.IllegalArgumentException: Argument cannot be null
    at org.eclipse.swt.SWT.error(SWT.java:4472)
    at org.eclipse.swt.SWT.error(SWT.java:4406)
    at org.eclipse.swt.SWT.error(SWT.java:4377)
    at org.eclipse.swt.widgets.Dialog.error(Dialog.java:198)
    at org.eclipse.swt.widgets.Dialog.checkParent(Dialog.java:164)
    at org.eclipse.swt.widgets.Dialog.(Dialog.java:127)
    at org.eclipse.swt.widgets.Dialog.(Dialog.java:97)
    at fr.ac6.mcu.ide.ui.dialogs.NewOrSelectBoardDialog.(NewOrSelectBoardDialog.java:84)
    at fr.ac6.mcu.ide.engine.ModifyBoardEngine.selectBoard(ModifyBoardEngine.java:134)
    at fr.ac6.mcu.debug.ui.MCUDebuggerTab.setDefaults(MCUDebuggerTab.java:788)
    at org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationTabGroupWrapper.setDefaults(LaunchConfigurationTabGroupWrapper.java:255)
    at org.eclipse.debug.internal.ui.launchConfigurations.CreateLaunchConfigurationAction.performAction(CreateLaunchConfigurationAction.java:80)
    at org.eclipse.debug.internal.ui.launchConfigurations.AbstractLaunchConfigurationAction$1.run(AbstractLaunchConfigurationAction.java:107)
    at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
    at org.eclipse.debug.internal.ui.launchConfigurations.AbstractLaunchConfigurationAction.run(AbstractLaunchConfigurationAction.java:110)
    at org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationsDialog$1.run(LaunchConfigurationsDialog.java:542)
    at org.eclipse.debug.ui.AbstractDebugView.doubleClick(AbstractDebugView.java:765)
    at org.eclipse.jface.viewers.StructuredViewer$1.run(StructuredViewer.java:832)
    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
    at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:50)
    at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:173)
    at org.eclipse.jface.viewers.StructuredViewer.fireDoubleClick(StructuredViewer.java:829)
    at org.eclipse.jface.viewers.AbstractTreeViewer.handleDoubleSelect(AbstractTreeViewer.java:1470)
    at org.eclipse.jface.viewers.StructuredViewer$4.widgetDefaultSelected(StructuredViewer.java:1263)
    at org.eclipse.jface.util.OpenStrategy.fireDefaultSelectionEvent(OpenStrategy.java:252)
    at org.eclipse.jface.util.OpenStrategy.access$0(OpenStrategy.java:249)
    at org.eclipse.jface.util.OpenStrategy$1.handleEvent(OpenStrategy.java:311)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
    at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4362)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1113)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4180)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3769)
    at org.eclipse.jface.window.Window.runEventLoop(Window.java:827)
    at org.eclipse.jface.window.Window.open(Window.java:803)
    at org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationsDialog.open(LaunchConfigurationsDialog.java:1154)
    at org.eclipse.debug.ui.DebugUITools$2.run(DebugUITools.java:619)
    at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
    at org.eclipse.debug.ui.DebugUITools.openLaunchConfigurationDialogOnGroup(DebugUITools.java:627)
    at org.eclipse.debug.ui.DebugUITools.openLaunchConfigurationDialogOnGroup(DebugUITools.java:560)
    at org.eclipse.debug.ui.actions.OpenLaunchDialogAction.run(OpenLaunchDialogAction.java:82)
    at org.eclipse.debug.ui.actions.OpenLaunchDialogAction.runWithEvent(OpenLaunchDialogAction.java:91)
    at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:237)
    at org.eclipse.ui.internal.WWinPluginAction.runWithEvent(WWinPluginAction.java:228)
    at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:595)
    at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:511)
    at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:420)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
    at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4362)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1113)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4180)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3769)
    at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine$4.run(PartRenderingEngine.java:1127)
    at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:337)
    at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine.run(PartRenderingEngine.java:1018)
    at org.eclipse.e4.ui.internal.workbench.E4Workbench.createAndRunUI(E4Workbench.java:156)
    at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:694)
    at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:337)
    at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:606)
    at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:150)
    at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:139)
    at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:134)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:104)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:380)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:235)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:669)
    at org.eclipse.equinox.launcher.Main.basicRun(Main.java:608)
    at org.eclipse.equinox.launcher.Main.run(Main.java:1515)

    Can you help me?

    P.S.
    Sorry fo my English.
    I'm newbie in microcontrollers

    Reads: 17641
    Posted by chrisstm32 on 2016-10-07 11:14

    Hi,
    maybe you should re-install the soft.
    Sincerely,


         Posted by Vetch on 2016-10-07 17:40

    Hello Slavius,
    I propose the following steps :
    - During the creation of your project in CubeMX (I’m using the V1.16.1), select Menu >> Project >> Settings;
    - Browse to select a folder in the field ‘’Project Location’’ (it will be your workspace) for example c:\Wks;
    - Give a “Project Name” (it will be a sub folder in your workspace), for example : Test1;
    - Select SW4STM32 in the Toolchain / IDE field;
    - Generate the project;

    - Launch SW4STM32 (I’m using the V1.8.0)
    - Select the workspace : C:\Wks;
    - Right-click in the Project Explorer window >> Import >> General >> Existing Projects into Workspace >> Next >> Browse >> select Test1 >> OK >> Finish;
    - Right-click in your Project >> Properties >> C/C++General >> Indexer >> Select “Enable project specific settings” and remove “Index unsused headers”;
    - Right-click in your Project >> Index >> Rebuild;
    - Right-click in your Project >> Build Project;

    Let me know

         Posted by Slavius on 2016-10-10 08:05

    Hello Vetch,
    Thanks for your reply.
    Now I have a lot of errors after building.

    Image


    Posted by Vetch on 2016-10-10 14:48

    Hello Slavius, I made the following steps and got ride of the errors :
    - Add #include "arm_math.h" in main.c as, in my case, the arm_bitreversal_q31 function is called from the main();
    - Add #include "stm32f407xx.h" in arm_bitreversal.c (to be inserted before the #include "arm_math.h");
    - Define the ARM_MATH_CM4 symbol in : Right-clic >> Properties >> C/C++Build >> Settings >>Symbols;
    - "Enable project specific settings" and Remove "Index unused headers" in : Right-clic >> Properties >> C/C++General >> Indexer;

         Posted by Slavius on 2016-10-11 12:31

    Hello,
    after these steps I have the following situation
    Image


    Posted by Vetch on 2016-10-11 16:09

    Hi Slavius,
    In the snapshot, I noticed that some files are not saved. To get the files saved automatically before build, you can edit the settings in Windows menu >> Preferences >> General >> Workspace >> "Save automatically before build"
    I faced same errors. The include order has a real impact. May you check the includes in the arm_XXX.c files you are using? It should be done like this :

    1. include "stm32f407xx.h"
    2. include "arm_math.h"
    3. include "arm_common_tables.h"
         Posted by Slavius on 2016-10-12 09:16

    Hello Vetch,
    Do you mean the file arm_bitreversal.c?
    There are
    #include "arm_math.h"
    #include "arm_common_tables.h"
    #include "stm32f407xx.h"
    Have you noticed that I wrote that problems began after cleaning of disk space? Before this operations my projects worked properly. Do you sure, that I can fix this problem by editing the files of the project? I'm not specialist.
    Thanks for help.


         Posted by Vetch on 2016-10-12 09:37

    Hi Slavius,
    Yes, in the file arm_bitreversal.c, the include must be like this :

    1. include "stm32f407xx.h"
    2. include "arm_math.h"
    3. include "arm_common_tables.h"

    You have to do the same if you use other arm_XXX.c files (for example in arm_shift_q31.c, ...)
    To sum-up, you have to define the FPU_PRESENT flag as soon as possible in the compilation process. That's why the #include "stm32f407xx.h" must be done before all other includes.
    Let me know if I am not clear.

         Posted by Slavius on 2016-10-12 12:30

    Hello Vetch,
    I've change the order of include and add
    include "stm32f407xx.h"
    include "arm_math.h"
    include "arm_common_tables.h"
    to all arm_XXX.c files, but i have the same result.


         Posted by Vetch on 2016-10-12 16:27

    Hi, attached my example project.
    Unzip it into you workspace. You should get files like the .project file into the /F407VGT folder.
    Then right-clic in the Project Explorer window >> Import >> General >> Existing Projects into Workspace >> Browse >> Select the F407VGT folder in your workspace >> Finish. Please, may you build the project and let me know.

    F407VGT.zip (422.45 Kb)
    Posted by Slavius on 2016-10-13 09:00

    Hello Vetch,
    I've built your project and it seems to be allright.

    10:00:13 **** Incremental Build of configuration Debug for project F407VGT ****
    make -j2 all
    make: Nothing to be done for `all'.

    10:00:16 Build Finished (took 3s.225ms)

    When I'm trying to debug project, I have error:
    Image


    Posted by Vetch on 2016-10-13 09:19

    Hi, most of the time, this error is just a configuration issue. Please, may you :
    - check for SW4STM32 updates : Help menu >> Check for Updates;
    - let me know the board you are using?
    - are you using Windows, Ubuntu or OS X?

         Posted by Slavius on 2016-10-13 10:54
    Hello, I updated SW4STM32 and now I can run your project. I use STM32F4-Discovey with STM32F407VG processor and Windows 7.
    Posted by Slavius on 2016-10-13 11:59
    Maybe, it's beter ti reinstall my Windows? I have such opportunity.

    Posted by Vetch on 2016-10-13 14:22
    Hi Slavius, I cannot advice about Windows. It seems that your SW4STM32 environment is functional. So it might be good to keep it as it is. FYI, you may get the update wizard automatically : Window menu >> Preferences >> Install/Update >> Automatic Updates >> Direcly show update wizard
    Posted by Slavius on 2016-10-13 14:45
    But I can run only your project. I use STM32Cube for generating projects and i can't simply run them but i did it earlier.

    Posted by Vetch on 2016-10-18 17:26

    Hi, once you are done with a debug session, you have to Terminate it = Red square button.
    Then you can launch another debug session from any other project.
    If it fails, let me know the error message you get in the console window and you can provide the .log file located in the .metadata folder of your workspace.


     
    Collapse/expand modules below