STM32F072RBT6 not properly modeled in OPENOCD? 64K instead of 128K
I have a board with STM32F072CB, for the moment I use the OpenOCD script from Discovery board STM32F072-Discovery (same MCU as Nucleo)
In my OpenOCD log the flash size is correct
Debug: 376 692 target.c:2203 target_read_u16(): address: 0x1ffff7cc, value: 0x0080
Info : 377 692 stm32f1x.c:996 stm32x_probe(): flash size = 128kbytes
Could you check this lines:
Debug: 127 94 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_flash bank STM32F072RBT6.flash stm32f1x 0x08000000 0 0 0 STM32F072RBT6.cpu
Debug: 128 94 command.c:145 script_debug(): command - ocd_flash ocd_flash bank STM32F072RBT6.flash stm32f1x 0x08000000 0 0 0 STM32F072RBT6.cpu
Check the project properties -> Target tab. In my case is
Target:
Series: STM32F0
Mcu: STM32F072RBTx
Board: STM32F072B-DISCO
Project Properties > C/C++ Build > Settings > Target (tab with AC logo)
;){kind=link}