System Workbench for STM32

Hi ilton104,

If I'm reading your problem correctly you had success programming the STEVAL-STLCS01V1 (plug or solder) using the plug in mode on the expansion cradle. But when using the STEVAL-STLCS02V1 (solder only) attached to the small cradle you get the "wrong device" error.

If that's the case, then I'm running into a similar issue. Were you ever able to solve it?

Basically, I bought the development kit, which included the one sensortile that could be plugged into the expansion board, or soldered to the small cradle. I ran through all of the example projects using the sensortile plugged into the expansion cradle with no issue. I then purchased a separate sensortile (STEVAL-STLCS02V1) that I soldered to the cradle, and that's the one giving me the "wrong device detected" error.

I need the mobility of the small cradle for a project I'm working on. Anyone have any idea what the issue may be here? Bad attachment of the sensortile to the board (looks good from what I can tell)?