Posted by bachabharat on 2017-09-25 15:59

I am trying to run a test example project on STM32H743XI Evaluation board but i get the following error.

IDE: SW4STM32

Open On-Chip Debugger 0.10.0-dev-00004-gcef2a8c-dirty (2017-08-31-14:07)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
srst_only separate srst_nogate srst_open_drain connect_assert_srst
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
adapter speed: 1800 kHz
adapter_nsrst_delay: 100
Info : tcl server disabled
Info : telnet server disabled
Info : clock speed 1800 kHz
Error: open failed (no matching adapter found)
in procedure ‘init’
in procedure ‘ocd_bouncer’

I have tried answers from the previous posts of same problem like re-installing the drivers and re-starting the PC but none of them helped me at all.
I would like to add that i am successful on debugging the code using uVision.
Find the attachment for debug configuration and error.

Thanks.
Bharath.