Loading...
 

Zephyr project on STM32

   Zephyr Workbench, a VSCode extension to manage Zephyr on STM32.
It enables users to easily create, develop, and debug Zephyr applications.
Main features:
  • Install host dependencies.
  • Import toolchain and SDK.
  • Create, configure, build and manage apps.
  • Debug STM32.
You can directly download it from the VSCode marketplace
For more details, visit the Zephyr Workbench

System Workbench for STM32

Forum List Topic List

[ prev topic | next topic ]  

Custom board - /usr/make/sh command not found

Posted by joelguittet on 2017-07-24 10:01

Hi all,

This is my first post on this forum, so let me introduce myself: I’m software designer working in railroad factory. I’m used to program NXP and Atmel devices mainly but that’s the first time I’m using STM32 devices. We are trying to build a prototype with a MURATA LORA module which has a STM32L082.

I have downloaded and installed System Workbench for STM32, windows x64. I have created a new project “test” and realize I have to create a new “custom board” (why not). Done with the right device. Custom board name is “SENSELORA”. Then selected and downloaded the HAL. Project created, main.c contain the main function with the infinite loop, looks good :-)

But now clinking the hammer.... and failing to build the project :-( Error is “/usr/make/sh: DSENSELORA: command not found”.

I don’t understand what I can do now, so any help will be appreciate, probably something I’m doing wrong because I’m new to this environnement.

Thanks,
Joel

Reads: 6884
Link
Posted by tang on 2017-07-24 12:23

Hi Joel,

Can you copy all the console output for more information about the problem ?

It seems that the build command is wrong. Did you change any settings ?
Please verify the following settings in the Project Properties > C/C++ Build > Settings > Tool Settings :

In MCU Settings :
- Prefix = arm-none-eabi-
- Path = ${openstm32_compiler_path}

In MCU GCC Compiler :
- Command = gcc

In MCU GCC Linker :
- Command = gcc

In MCU GCC Assembler :
- Command = as

If the values are valid, please create a new project with your custom board then build it immediatly. Does the build still fail ?

Regards,
Kevin (ac6)

Link
Posted by joelguittet on 2017-07-24 12:33

Hello kevin,

Thanks for your quick answer and your help.

Here is the console output:

10:10:53 **** Build of configuration Debug for project test ****
make all
Building file: ../startup/startup_stm32.s
Invoking: MCU GCC Assembler
D:R
/usr/make/sh: DSENSELORA: command not found
make: *** startup/startup_stm32.o Error 127

10:10:55 Build Finished (took 1s.523ms)


I haven’t chanegd any settings and I confirm that they are correct according to yours.
The project is just created, and I have tried to build immedialty. I haven’t modified the code, just trying to build the generated main.c provided by the environement.

  1. include “stm32l0xx.h”


int main(void)
{

for(;;);
}


I’m using the last version of System Workbench for STM32 (V2.1).

Thanks,
Joel

Link
Posted by hj on 2017-08-24 11:53

17:54:00 **** Incremental Build of configuration Debug for project netX EtherCAT ****
make all
Building file: C:/Users/xuyuyang/STM3_netX_F7_V1/Projects/STM32F767ZI-Nucleo/Applications/netX/Common/cifXToolkit/User/TKitUser_Custom_STM32.c
Invoking: MCU GCC Compiler
C:\Users\xuyuyang\STM3_netX_F7_V1\Projects\STM32F767ZI-Nucleo\Applications\netX\EtherCAT\SW4STM32\STM32F767ZI-Nucleo\Debug
arm-none-eabi-gcc -mcpu=cortex-m7 -mthumb -mfloat-abi=hard -mfpu=fpv5-d16 -DUSE_HAL_DRIVER -DSTM32F767xx -DUSE_STM32F7XX_NUCLEO_144 -DCIFX_TOOLKIT_HWIF -I”C:/Users/xuyuyang/STM3_netX_F7_V1/Projects/STM32F767ZI-Nucleo/Applications/netX/EtherCAT/Inc” -I”C:/Users/xuyuyang/STM3_netX_F7_V1/Projects/STM32F767ZI-Nucleo/Applications/netX/EtherCAT/Inc/EtherCAT” -I”C:/Users/xuyuyang/STM3_netX_F7_V1/Projects/STM32F767ZI-Nucleo/Applications/netX/Common/Inc” -I”C:/Users/xuyuyang/STM3_netX_F7_V1/Projects/STM32F767ZI-Nucleo/Applications/netX/Common/cifXToolkit/OSAbstraction” -I”C:/Users/xuyuyang/STM3_netX_F7_V1/Projects/STM32F767ZI-Nucleo/Applications/netX/Common/cifXApplicationDemo/Inc” -I”C:/Users/xuyuyang/STM3_netX_F7_V1/Drivers/CMSIS/Device/ST/STM32F7xx/Include” -I”C:/Users/xuyuyang/STM3_netX_F7_V1/Drivers/CMSIS/Include” -I”C:/Users/xuyuyang/STM3_netX_F7_V1/Drivers/STM32F7xx_HAL_Driver/Inc” -I”C:/Users/xuyuyang/STM3_netX_F7_V1/Drivers/BSP/STM32F7XX_NUCLEO_144” -I”C:/Users/xuyuyang/STM3_netX_F7_V1/Middleware/Third_Party/cifXToolkit/Source” -I”C:/Users/xuyuyang/STM3_netX_F7_V1/Middleware/Third_Party/cifXToolkit/SerialDPM” -Os -g3 -Wall -fmessage-length=0 -ffunction-sections -c -fmessage-length=0 -MMD -MP -MF”Middleware/cifXToolkit/User/TKitUser_Custom_STM32.d” -MT”Middleware/cifXToolkit/User/TKitUser_Custom_STM32.o” -o “Middleware/cifXToolkit/User/TKitUser_Custom_STM32.o” “C:/Users/xuyuyang/STM3_netX_F7_V1/Projects/STM32F767ZI-Nucleo/Applications/netX/Common/cifXToolkit/User/TKitUser_Custom_STM32.c”
__/usr/make/sh: arm-none-eabi-gcc: command not found
make: *** Middleware/cifXToolkit/User/TKitUser_Custom_STM32.o Error 127__

17:54:01 Build Finished (took 790ms)

Link
Posted by hj on 2017-08-24 11:57
I have also encountered the same problems. all the set is the same with your reply , but it also turns out the error . please to see the last two lines of last reply .thank you !
Link
Posted by hj on 2017-08-31 05:28

my problem has solved . the china STM32 agency give me some help .
The error is caused by the system didn’t install the Eclipse for the C/C++ software.
The system workbench for STM32 software is integated on the Eclipse . so you must uninstall the system workbench for STM32,then install the Eclipse for C/C++ software , after it ,you can install the system workbench for STM32 , then the problem solved .

Link

Posted by tang on 2017-07-24 13:47
Do you have any special charaters in the System Workbench installation path or in the workspace path ?
Link

Posted by joelguittet on 2017-07-24 15:18

Hello tang!

Match!! I had a special character in the workspace path, I have created a new workspace in C:\ and it is now building!

Thanks for your help,
Joel

Link

 

Newest Forum Posts

  1. Монтаж камина с грилем в Москве - установка и барбекю by KpddomErorb, 2025-05-10 18:28
  2. SPI on Nucleo_STMH533RE by royjamil, 2025-05-04 20:13
  3. SPI on Nucleo_STMH533RE by higginsa1, 2025-03-25 07:37
  4. SPI on Nucleo_STMH533RE by royjamil, 2025-03-23 11:31
  5. SPI on Nucleo_STMH533RE by higginsa1, 2025-03-23 09:33
  6. Configuring DMA for ADC in SW? by sam.hodgson, 2025-03-04 12:58
  7. Build a project in "release" mode by info@creosrl.it, 2025-02-20 18:12
  8. Build a project in "release" mode by info@creosrl.it, 2025-02-20 17:05
  9. Build a project in "release" mode by tang, 2025-02-20 10:36
  10. Build a project in "release" mode by info@creosrl.it, 2025-02-19 17:35

Last-Modified Blogs

  1. System Workbench for STM32