Posted by dautrevaux on 2015-06-03 09:48

Hi Julien,
Sorry for the delay

If you don’t find this menu entry, just update your installation (Help >> Check for updates...); we just release a new version of Ac6 System Workbench for STM32, with a number of enhancements.
Bernard

Posted by Julien.Kern on 2015-06-03 11:25

Hello Bernard,

Thank you for your answer.

I tried your solution; this “Convert to C++” does not seem to do anything, or I can’t see it !

Nervermind, I find a solution which seems to work here: https://isocpp.org/wiki/faq/mixing-c-and-cpp

So I’ve integrated some C test files on mbed and following the link above and this actually worked !
Note that you need a C++ Compiler to do this, that’s why I found it easier to import C files on mbed.

Julien.

Posted by dautrevaux on 2015-06-03 11:58

Hi Julien,

There is nothing really changed when you switch a project to C++ (except that the menu entry “Convert to C++” now reads “Convert to C” ); the only change you will see is that the linker will now use arm-none-eabi-g++ instead of -gcc (and that in project properties build tools settings you will see the G++ compiler).

However there may be a problem at link time; it seems to be that, when converting your project from C to C++, you lose the link to the HAL library... That seems to be a small bug in the tool that we will investigate, although there is a quite simple workaround in th emean-time.

To correct it you should recreate this link by:

• project >> Properties >> C/C++ General >> Paths and Symbols >> References
  • Here the HAL library shoudl be selected then you need first to deselect it the Apply your change
• Now reselect it and click OK

Now your project should compile and link correctly in C++ and you could add C++ code in it.

Bernard