Forum: System Workbench for STM32

Incorrect project configuration from CubeMX32 for STM32F4 + RTOS

Posted by JonasWitt on 2015-05-17 19:31

Hi all,

it seems that CubeMX32 generates an incorrect project configuration for my STM32F429ZI discovery board when I choose to add FreeRTOS to the project. I got errors such as selected processor does not support Thumb mode as described in this postQuestion but my solution had to be slightly different because the MCU Settings do not have the mentioned drop down menus:

MCU Settings

My solution was to add “-mfpu=fpv4-sp-d16 -mfloat-abi=hard” to both “MCU GCC Compiler->Miscellaneous->Other Flags” and “MCU GCC Linker->Miscellaneous->Other Flags”. Why are these FPU dropdown menus not available under MCU Settings? CubeMX32 generating an erroneous project configuration in the first place is another problem, but not on your side.

Regards,
Jonas

Reads: 11627
Link
Posted by dautrevaux on 2015-06-03 12:10 France

Hi Jonas,
Sorry for the delay mad
All this should be corrected by the new release; you just have to upgrade both tools by the menu entry Help >> Check for Updates... and it should now work seamlessly.
Bernard

Link
Posted by elgarbe on 2015-06-05 14:21

Bernard, where do I find changelog for new System workbench version and for cube 1.6 firmware?

thank

Link