Loading...
 
Skip to main content

System Workbench for STM32

Forum List Topic List

Forums » System Workbench for STM32 » how to tell gcc to generate a hex file?
 
Thread actions
Print this page
  • Print all pages

    • how to tell gcc to generate a hex file?

    Posted by mikewax on 2017-03-25 23:35

    so in AC6 ver. 1.13.2.201703061529 i go to the tool settings and there's no option to choose the output format. anyone know the command line option to tell gcc to generate a hex file?

    thanx, mike

    using a nucleo 70RB board with win7

    Reads: 23237
    Posted by Vetch on 2017-03-27 11:02

    Hello,
    By default SW4STM32 generates an ELF file and a BIN file.
    For test, I updated the original GCC command available in :
    Properties >> Settings >> Build Steps >> Post-build steps
    ...with (to get an ELF, a BIN and an HEX files) :
    arm-none-eabi-objcopy -O binary "${BuildArtifactFileBaseName}.elf" "${BuildArtifactFileBaseName}.bin" && arm-none-eabi-objcopy -O ihex "${BuildArtifactFileBaseName}.elf" "${BuildArtifactFileBaseName}.hex" && arm-none-eabi-size "${BuildArtifactFileName}"

    You can find the same question in previous posts :
    http://www.openstm32.org/tiki-view_forum_thread.php?comments_parentId=925

         Posted by mikewax on 2017-03-27 23:34

    yes thanx for the reply i did end up finding the other thread and i got the output i needed.

    mike 😊


     
    Collapse/expand modules below