Loading...
 
Skip to main content

System Workbench for STM32

Forum List Topic List

 
Thread actions
Print this page
  • Print all pages

    • Using BlackMagic probe to upload frmware and debug

    Posted by zhivko on 2017-02-22 00:20
    Is there some other hw I need to buy that is recommended for programming stm32f3 from openstm32 eclipse environment ?
    Reads: 2935
    Posted by zhivko on 2017-02-22 15:02

    I was able to upload from openstm32 using legacy debugger under hardware debugging with this command:

    target extended-remote COM6
    mon swdp_scan
    attach 1
    monitor vector_catch disable hard
    set mem inaccessible-by-default off
    monitor option erase
    set print pretty

    regards

         Posted by shp-denis on 2017-04-09 16:29

    Yes, it is OK in cmd.exe,
    but what about eclipse.

    I have found this one post about .gdbinit file
    https://esden.net/2014/12/29/black-magic-discovery/

    Idea is to create .gdbinit in project root dir (e.g. ...\workspace\blink\.gdbinit) and run
    arm-none-eabi-gdb - -command c:/path_to_.gdbinit
    and even:
    arm-none-eabi-gdb - -command c:/path_to_.gdbinit - -version
    (- - = --)

    It works in cmd.exe, but how to run in from Eclipse?
    I've tried to specify it on "GDB Command:" in debug config, but it fail

    Any more ideas?


     
    Collapse/expand modules below