Loading...
 
Skip to main content

System Workbench for STM32

Forum List Topic List

Forums » System Workbench for STM32 » New development board (STM32F769I-DISCO)
 
Thread actions
Print this page
  • Print all pages

    • New development board (STM32F769I-DISCO)

    Posted by Vortexhunter on 2017-01-09 17:41

    Hello,

    We are going to start developing embedded systems and we purchased the STM32F769I-DISCO board. I was planning on using OpenSTM32 to write, test and debug code (I am also a first time user of OpenSTM32).

    I installed the IDE and on project creation I noticed that the board is not in the supported list. I imagine that this is because the board is new-ish. What are the limitations I will have until the board is supported? I got this board to test the MCU's capabilities as a network connected embedded device. But the first formal project I will create is a multi-axis stepper motor controller, so I won't be using most of the board's features.

    Many thanks.

    OS:
    Windows 7 x64

    My version of SW:
    System Workbench for STM32 - C/C++ Embedded Development Tools for MCU
    Version: 1.8.0.201603291114

    Board:
    STM32F769I-DISCO

    Reads: 8696
    Posted by LaurentL on 2017-01-09 17:43

    Hello,

    You need to update the software, use the menu Help => Check For Updates
    You'll then see the board...

         Posted by Vortexhunter on 2017-01-09 17:46

    Doing so now! Mistakenly assumed that the installer had the latest version.

    Thanks 😊