function allocation & IP code protection
Hi all
I’m trying to recompile the X-CUBE-PCROP examplewith AC6 (bornt with Keil) but there are some trouble
I’ve tryed to relocate functions placing this conde in the liner file
MEMORY
{
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 992K
IP_CODE (x) : ORIGIN = 0x080F8000, LENGTH = 32K
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K
}
and the related section:
.ip_code :
{
- (.IP_Code*);
} > IP_CODE
my function
attribute((section(“.IP_Code”))) int IP_test()
{
....
}
but even if it compile correctly and the .map file is ok I cannot program the nucleo board and this is the reported error:
auto erase enabled
Info : Device id = 0x10076415
Info : STM32L4xx flash size is 1024kb, base address is 0x8000000
Info : Erase the padded zone before the write
Error: Whole bank access must start at beginning of bank.
Info : Erase the padded zone before the write
Warn : Adding extra erase range, 0x00003000 to 0x000032bf
Info : wait_status_busy, WRPERR : error : remote address 0x40022000
Error: erase time-out error sector 16
Error: failed erasing sectors 6 to 495
Info : Padding image section 1 with 1002816 bytes
Info : wait_status_busy, WRPERR : error : remote address 0x40022000
Error: erase time-out error sector 16
Error: failed erasing sectors 0 to 496
- Programming Failed **
shutdown command invoked
How can I solve this issue?
Thanks
Ivano
;){kind=link}