Loading...
 

Zephyr project on STM32

   Zephyr Workbench, a VSCode extension to manage Zephyr on STM32.
It enables users to easily create, develop, and debug Zephyr applications.
Main features:
  • Install host dependencies.
  • Import toolchain and SDK.
  • Create, configure, build and manage apps.
  • Debug STM32.
You can directly download it from the VSCode marketplace
For more details, visit the Zephyr Workbench

System Workbench for STM32

Forum List Topic List

[ prev topic ]  

recommandation for F427 clocks

Posted by mkrug on 2016-01-14 15:20

Hi,

I’m struggling getting the best out of the clock configurations of the F427 for my needs. I had to use the following peripherals

+ USB FS Device + SDIO-4 wire to connect to a SD Card + ETH RMII Mode (but with external osc) + CAN 500kBit -1MBit + ADC 10kHz + digitial in with Capture Compare with 1µs resolution


For precision reasons I like to use the HSE with 25MHz. This value can be changed if it is of any benefit.

Especially the first two topics makes me some errors. The Cube clock configuration tool was only able to provide a solution for a 120MHz system clock. However I have some demanding algorithms to run and therefore like to be as close as possible at the maximum system clock.

Any suggestions for the different PLL settings?

Best Regards
Markus

Reads: 6264
Link
Posted by mazensaad on 2016-02-16 19:41


Hi,

If you have a USB in the project it will not give the freedom to chose any clock since the USB need excatly 48MHz
But I do not know about CAN + SDIO
I use USB+Ethernet and I could get it at “168Mhz”

best regards
Eng.Mazen ALjeddani

Link

 

Newest Forum Posts

  1. Монтаж камина с грилем в Москве - установка и барбекю by KpddomErorb, 2025-05-10 18:28
  2. SPI on Nucleo_STMH533RE by royjamil, 2025-05-04 20:13
  3. SPI on Nucleo_STMH533RE by higginsa1, 2025-03-25 07:37
  4. SPI on Nucleo_STMH533RE by royjamil, 2025-03-23 11:31
  5. SPI on Nucleo_STMH533RE by higginsa1, 2025-03-23 09:33
  6. Configuring DMA for ADC in SW? by sam.hodgson, 2025-03-04 12:58
  7. Build a project in "release" mode by info@creosrl.it, 2025-02-20 18:12
  8. Build a project in "release" mode by info@creosrl.it, 2025-02-20 17:05
  9. Build a project in "release" mode by tang, 2025-02-20 10:36
  10. Build a project in "release" mode by info@creosrl.it, 2025-02-19 17:35

Last-Modified Blogs

  1. System Workbench for STM32