Starting STM32F103C8T6 using Workbench for STM32
I work based on training material for the Nucleo Board
English - https://translate.google.pl/translate?hl=pl&sl=pl&tl=en&u=https%3A%2F%2Fforbot.pl%2Fblog%2Fkurs-stm32-3-plytka-nucleo-konfiguracja-srodowiska-id4875
Basic - https://forbot.pl/blog/kurs-stm32-3-plytka-nucleo-konfiguracja-srodowiska-id4875
I chose MCU and F1 and C8T because in Board is not my Board
https://obrazki.elektroda.pl/1412235200_1586006027.png
https://obrazki.elektroda.pl/2257166500_1586005531.png
I can’t download library in program
On the ST website I found a library for F1
https://www.st.com/content/st_com/en/products/embedded-software/mcu-mpu-embedded-software/stm32-embedded-software/stm32-standard-peripheral-libraries/stsw-stm32054.html
As you can see in the picture below, I pasted two selected files into the folder
https://obrazki.elektroda.pl/7709368900_1586005612.png
Unfortunately the program can not find the library
https://obrazki.elektroda.pl/8225743700_1586005716.png
Maybe I’m doing something wrong or my library is wrong ?