Posted by Vetch on 2016-11-18 12:52

Hi, how did you import the project? Is it coming from CubeMX or from the HAL/FW package?
It seems the include paths are not set.
Import project from CubeMX
- Launch CubeMX >> New Project >> Board Selector tab >> Nucleo 64 STM32L476 board >> OK;
- Project menu >> Settings >> Toolchain / IDE = SW4STM32;
- Project menu >> Settings >> Project Location = C:\STM32_L4_Workspace (for example);
- Project menu >> Settings >> Project Name = L4_Blinky (for example);
- Enable the expected peripherals from the Pinout tab;
- Tune the clock frequencies from the Clock Configuration tab;
- Tune the peripheral configurations from the Configuration tab;
- Project menu >> Generate Code >> Close;
- Launch SW4STM32 and select the workspace (C:\STM32_L4_Workspace, for example);
- Right-click in the Project Explorer window >> Import >> General >> Existing Projects into Workspace >> Next >> Browse >> Select the project folder (L4_Blinky, for example) >> Finish

Import project from HAL/FW Package
- launch SW4STM32 and select the workspace (for example) :
...\STM32Cube_FW_L4_V1.5.0\Projects\STM32L476RG-Nucleo\Examples\GPIO\GPIO_IOToggle\SW4STM32\
- Right-click in the Project Explorer window >> Import >> General >> Existing Projects into Workspace >> Next >> Browse >> Select the project folder (for example ...\STM32Cube_FW_L4_V1.5.0\Projects\STM32L476RG-Nucleo\Examples\GPIO\GPIO_IOToggle\SW4STM32\STM32L476RG_NUCLEO folder) >> Finish
- Right-click on the STM32F4xx-Nucleo project >> Properties >> C/C++ General >> Indexer >> Enable project specific settings >> Remove the Index unused headers >> Apply >> OK
- Right-click on the STM32F4xx-Nucleo project >> Index >> Rebuild
- Right-click on the STM32F4xx-Nucleo project >> Build Project

SW4STM32 Tips & Tricks
- Right-click on the project >> Properties >> C/C++ Build >> Enable parallel build >> Apply >> OK
- Right-click on the project >> Properties >> C/C++ Build >> Settings >> MCU GCC Compiler >> Dialect >> Select the expected C standard (C99) >> Apply >> OK
- Right-click on the project >> Properties >> C/C++ General >> Indexer >> Enable project specific settings >> Remove the Index unused headers >> Apply >> OK
- Right-click on the project >> Index >> Rebuild
- Enable the notifications for the automatic updates in the Window menu :
Windows menu >> Preferences >> Install/Update >> Automatic Updates >> Enable automatically find new updates and notify me
- Configure the Network connection if you are using a proxy :
Windows menu >> General >> Network Connections
- Check fo updates : Help menu >> Check for Updates

Posted by dnbharrin on 2016-11-18 18:43

Vetch,
Thanks for responding.

I followed your advice. The hal_conf.h file has HAL_RCC_MODULE_ENABLED defined.

I think I found the problem. The default in CubeMX Project >> Settings >> Project >> Toolchain / IDE was set to EWARM instead of STM32

I then ran build in STM32 and got no errors in the Problems window. This was run with Project Properties Build Type set to External Build. I do not know what External and Internal Build means. If I use Internal Build I get the Error 2 message in the Problems Window.

However, with no errors in Problems Window using External Build, it still will not run. I get this error message:

Error starting process.
Cannot run program “C:\STM32 Nucleo Projects\Test1_ST_20161117\SW4STM32\Test1_ST_20161117\Debug\Test1_ST_20161117.elf”: Launching failed
Cannot run program “C:\STM32 Nucleo Projects\Test1_ST_20161117\SW4STM32\Test1_ST_20161117\Debug\Test1_ST_20161117.elf”: Launching failed
Cannot run program “C:\STM32 Nucleo Projects\Test1_ST_20161117\SW4STM32\Test1_ST_20161117\Debug\Test1_ST_20161117.elf”: Launching failed

Is this just because I do not have any code in the users code sections? or is it something else?

Thanks again,

Dave

Posted by Vetch on 2016-11-21 12:01

Hi, in CubeMX, the project must be generated with :
- Toolchain / IDE = SW4STM32;
and
- Generate Under Root (selected);
The project can be imported in SW4STM32 as described in the documentation :
http://www.openstm32.org/Importing+a+STCubeMX+generated+project?structure=Documentation

The “Launching Error” can be due to the USB cable or the board.
Did you manage to connect using ST Link Utility?
What are the OS and the SW4STM32 version?