System Workbench for STM32

Posted by tarek bouchkati on 2016-02-21 14:39

Blindly, I could tell you to add '-S' to compiler command (Project Properties > C/C++ Build > Settings > Tool Settings (TAB) > MCU GCC Compiler > Miscellaneous > Other flags)

http://www.delorie.com/djgpp/v2faq/faq8_20.html

Unfortunately this won't work for you (I have tested it) :/

After some digging I found something (-Wa,-adhlns=xxx.lst) but the problem is how to put it in (eclipse) gcc compiler options ....

-Wa,-adhlns="$(@:%.o=%.lst)"

Update: this command will generate lst file for each c file
To generate listing for the hole application, you can use objdump
To add the call to objdump after build you have to add it in post-build steps (Project Properties > C/C++ Build > Settings > Build Steps (TAB))

arm-none-eabi-objdump -D "${BuildArtifactFileBaseName}.elf" > "${BuildArtifactFileBaseName}.lst"

As you can see the Command field of pot build steps is not empty, to conserve old post build steps add &&
eg.

arm-none-eabi-objdump -D "${BuildArtifactFileBaseName}.elf" > "${BuildArtifactFileBaseName}.lst" && arm-none-eabi-objcopy -O binary "${BuildArtifactFileBaseName}.elf" "${BuildArtifactFileBaseName}.bin" && arm-none-eabi-size "${BuildArtifactFileName}"