stm32f103c8t6 doesn't halt nor reset
When I Reset the MCU with hardware I see it gets into a halt (Led stopes blinking) and I get these messages in addition to the above.
STM32F103C8Tx.cpu: target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x08000170 msp: 0x20005000
If I hold the reset button while pressing “Debug” The firmware just continues while I get the errors above.
Something does the reset, maybe not enough for the MCU to get into a halt?