Loading...
 

SW4STM32 and SW4Linux fully supports the STM32MP1 asymmetric multicore Cortex/A7+M4 MPUs

   With System Workbench for Linux, Embedded Linux on the STM32MP1 family of MPUs from ST was never as simple to build and maintain, even for newcomers in the Linux world. And, if you install System Workbench for Linux in System Workbench for STM32 you can seamlessly develop and debug asymmetric applications running partly on Linux, partly on the Cortex-M4.
You can get more information from the ac6-tools website and download (registration required) various documents highlighting:

System Workbench for STM32


You are viewing a reply to Failed to launch debug  

Failed to launch debug

Hi Laurent and All.

OpenSTM32 can now program my custom board and I could start debugging.

It appeared that the reset signal was not connected properly to the board and processor. After making the necessary correction, all seems fine.
I was confident that my HW was good since it was working with STLink utility and with 2 other Eclipse based IDEs. They should rely on “other mechanism” to set the processor in expected state.

Thanks again.
Gerard